And now some Lorem Ipsum to fill the content

Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent scelerisque commodo massa. Ut volutpat. Maecenas luctus augue quis velit.

Ut volutpat. Maecenas luctus augue quis velit. Lorem ipsum dolor sit amet, adipiscing elit. Scelerisque commodo massa.

Not a member yet? Sign Up

Products

Hot Rolled Coil (HOR)

They are used to manufacture tires, Automotive parts (body, cross and side members) , pipes as well as for the construction of buildings, bridges, rail road car.

       

  • Thickness from 0.070″ up to .500″
  • Width from 36″ up to 60″ *Width depending on the steel grade and thickness.
  • Coiled Weight from 15 to 20 mt/Coil ID 30″
 

Pickled (Dry) and/or Oiled (P&O)

They are used to manufacture tires, Automotive parts (body, cross and side members) , pipes as well as for the construction of buildings, bridges, rail road car.

             

  • Thickness from .070″ up to 0.390″
  • Width from 36″ up to 60” *Width depending on the steel grade and thickness.
  • Coiled Weight from 6 to 20 mt/Coil ID 24″.

 

Cold Rolled Coil (CRC)

The products manufactured by hot rolling are subjected to a cold rolling process to reduce its thickness, obtain excellent formability a smooth clean surface, suitable for a wide range of applications.

 

  • Thickness from 0.017″ up to 0.1046”
  • Width from 36″ up to 50″
  • Coiled Weight from 6 to 20 mt
  • Coil ID 20″ or 24″(but has to be tension level)
  •  

 

Plate (HRO)

The plate surface is not free of surface oxide. The plate is used in structural applications and / or applications where surface quality is not important. Plate applications are primarily for the manufacture of pipes, in the construction industry and transformation, among others.
             

  • Thickness from 0.250″ up to 2.00″
  • Width from 60″ up to 120″
  • Length from 240″ up to 480″
  • *Width and length depending on the steel grade and thickness.
  •  

 

Structural Shapes

   
Shapes "W" IPR

Shapes "C" CPS

Angles "L" APS

 

.

           
 

The beam is a key element in the building, whether it was the nature. A beam is designed to withstand weight and not only pressure but also bending and tension depending on the purpose shall prevail beam concept for engineering and architecture, which predominates.